How to Connect a Somfy Eolis 3D RTS Sensor to Your Somfy Awning or Screen
In this article, we explain how to connect the Somfy Eolis 3D RTS sensor to your Somfy awning or screen.
This RTS sensor will give you wind protection and automatically raise awnings based on measured wind speed.
The process of connecting the device to your Somfy awning is very simple and it contains three crucial steps.
Follow the steps below:
1. Since you will use the remote control to connect the RTS sensor, make sure it is connected to the Somfy awning or screen.
2. Turn over the remote control, press and hold the program button for about two seconds until the motor response.
3. After the motor has responded, take a small screwdriver and open up the back of the sensor. You will notice a red program button. Press the button and check if the motor responds. If the lights are flashing, the sensor is successfully connected.
From now on, the sensor will automatically detect any wind to protect the screen.
It is important to point out that you can still use the remote control to control the screen in the meantime.
- 48 comments